repeat">
Srinivasa Steels
Srinivasa Steels
Navavoor Pirivu, Coimbatore, Tamil Nadu
GST No. 33ALDPM0314R1Z4
07942538105 79% Response Rate
Send E-mail

TMT Bars

Wholesale Trader of a wide range of products which include jsw neosteel tmt bars, sail iron tmt bar, tulsyan tmt bars, 12 mm tata tiscon sd tmt bar, 8 mm tata tiscon sd tmt bar and tata tiscon 550sd tmt bar.
Request CallBack
  • Jsw Neosteel Tmt Bars
  • Jsw Neosteel Tmt Bars
  • Jsw Neosteel Tmt Bars
Jsw Neosteel Tmt Bars
Get Best Quote

Jsw Neosteel Tmt Bars

Approx. Price: Rs 78.50 / KgGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity200 Kg
GradeFe 500D
TypeJSW STEEL
Product Details
  • Super-premium high strength and high ductility TMT re-bars typically used in the construction of all residential & commercial projects. Fe 5500 bars are also used in projects like metros. bridges, highways etc. as well as specialized infrastructure projects like nuclear power plants. These are also used in earthquake-prone areas due to a high value of percentage elongation. 
Benefits:-
  • Lower Steel Consumption :- Structures designed by JSW neosteel 5500D consumes less stel upto 15% of steel savings.
  • Low Labour Cost :- Using Less numbers of bars means using less labour which severes cost.
  • Cost Saving :- Consumption of TMT rebars is less in Fe 550D baed on the same load bearing structure.
  • Time Saving :- Lesser time is needed for placing/typing of bars and less weight on cranes improves construction efficiency.
  • Consistent Quality Across the bar
  • Highest Level of purity 
  • Best bonding with cement

Yes! I am Interested
Watch Video
Request CallBack
Sail Iron TMT Bar
Get Best Quote

Sail Iron TMT Bar

Approx. Price: Rs 73 / KgGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity200 Kg
GradeFe 500D
FeaturesHigh Temperature and Pressure Resistance
Usage/ApplicationResidential Buildings
TypeTMT
Carbon0.25 %
Product Details
  • Fire Resistance All Sail TMT-EQR bars are able to withstand fire hazards when enclosed in concrete up to 6000C, whereas ordinary TMT starts losing its mechanical properties from 250°C. 
  • Corrosion Resistance Sail TMT-EQR is also available in corrosion-resistant variety (HCR) with modified chemical compositions to give enhanced resistance to seismic and corrosive atmospheric conditions. 
Product Characteristics of SAIL TMT-EQR Rebars 
  • High UTSNS ratio :- Provides good plastic energy absorption
  •  High total elongation:-  Higher resistance to failure 
  • High uniform elongation:-  Enhances plastic energy absorption capacity. Delays failure i.e. onset of necking
  • Low variation in YS:-  Avoids localised shear failure 
  • Higher strength (YS & UTS) :- Lower dead load .Higher energy absorption capacity with elastic zone 
  • Composite microstructure martensite rim & ferrite-pearlite core:- Fire resistance due to tempered martensitic rim 
  • Good weldability :- Enhances cold and hot cracking resistance. Pre-welded meshes can be used to eliminate manual binding at site 
  • From highrises to flyovers, bridges, dams, railways stations, ports and airports, SAIL TMT-EQR Rebars are strengthening modern India from deep within. Steel Authority of India Limited, India's largest and most trusted steel maker, produces Earthquake Resistant (EQR) TMT (thermo-mechanically treated) rebars for use in construction in seismic zones and other areas where the possibility of earthquakes exist. SAIL TMT-EQR Rebars, produced from Sail's modernised mills at IISCO Steel Plant, Durgapur Steel Plant and Bhilai Steel Plant, are superior, elastic energy absorbing bars that are supplied in both straight and coil form.  All Sail TMT-EQR bars fully conform to revised IS 1786-2008 grade D (ductile) specifications. SailTMT-EQR rebars are characterised by higher UTS/YS ratio due to which they are capable of absorbing more energy if pressure-loaded beyond yield point due to sudden natural occurrences such as an earthquake, tsunami, etc. The desired UTS/YS ratio is 1.20 (minimum) for grade Fe 415 and 1.18 (minimum) for grade Fe 500. Further, the percentage elongation of Sail TMT-EQR rebars is enhanced to minimum 18% with a guaranteed UTS/YS ratio of minimum 1 18 These enhanced attributes enables the material to withstand and absorb sudden loads encountered during earthquakes, cyclones, tsunamis, etc., thus providing higher safety to structures. 
Features of Sail TMT-EQR Rebars/Coils 
  • Bond Strength :- The bond strength of all Sail TMT-EQR bars has been tested at the National Test House, Alipore, Kolkata and meets IS 1 786-2 008 norms. 
  • Weldability :- Sail TMT-EQR bars are perfeclty weldable by normal process of welding with suitable electrodes. They are also weldable without preheating, preferably with low hydrogen electrode. The weldability of SAIL TMT-EQR bars has been tested and certified by the Welding Research Institute, Trichy. 
  • Bendability :- All Sail TMT-EQR bars have lower bend diameter compared to specified bend diameters as per IS 1 786- 2 008, Grade D specification. This allows easier bending with less effort and thus facilities easier onsite works. 

Yes! I am Interested
Request CallBack
Tulsyan Tmt Bars
Get Best Quote

Tulsyan Tmt Bars

Approx. Price: Rs 69.50 / KgGet Latest Price
Product Details:
GradeFe 500
MaterialIron
Single Piece Lengthabove 20 meter
Usage/ApplicationInfrastructure
TypeTMT Bars
BrandTulsyan
Product Features :-
  • Low Carbon content and made from fully killed steel
  • Higher yield strength , ultimate tesile strength and higher percentage elongation when compared to cold twisted bars of some grade.
  • Easy bendability, weldability, and excellant ductability ensures exonomy and safety of use.
  • In built ability to resist loss of strength of higher temperature
  • Requires less energy for bending and rebending along with superior reverse bending properties
  • Can be bulit welded or lap welded
  • Use of Fe-500 Grade results in soving more than 15% in steel consumption when compared to cold wisted bars
  • Higher corrosion resistance and sesmic ressitance compared to CTD
  • Unideally suited for any type of concrete structure
  • The only plant to adopt this technology for production of rebars from the design stage. Hence the total extent of the superior technology could be harrnessed 120 meters length of the cooling bend avail, able for self tempering which no other mill in india can match is the testimony for this.
  • These bars are made from virgin steel in bloast furnace, basic oxygen furncae continuous casting route. steel is fully killed best quality raq materials. rolling is done in the stage of the art mills with latest technologes. not even a single ton of rebar in produced by conversion
  • The low carbon content and low carbpn equivalent of Vizag TMT reinforcement bars ensure excellent weldability even while using any of the welding processors such as arc welding, flahs butt welding, gas shielded semi automatic wleding, gas pressure wleding and resistance arc welding etc. welding of these bars does not require pre heating or post heating. Vizag TMT Bars indiacte good welding properties in case of butt welds cross welds and lop welds. Tensile tests carried out on these reinforcement bars after butt welds, cross welds and lap welds have shown no failure at the weld joints. Normal electrodes with matching strength can be used for welding
  • Fatigue test carried out on Visag TMT Bars (by subjecting to alternate tensile stressing) has shown that the fatigue strength o fthe bars is equal to the reinforcement bars produced by other methods. The fatigue test was also carried out on bent and angled bars encaed in concrete. The results were obtained by using constant amplitude loadng of 200 Mpa with a maximum stress squal to 0.7 X Yield strength. The fatigue strength of these bars meets the requirements given in various international standards

Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
12 mm Tata Tiscon Sd Tmt Bar
Get Best Quote

12 mm Tata Tiscon Sd Tmt Bar

Approx. Price: Rs 90 / KgGet Latest Price
Product Details:
MaterialCarbon Steel
BrandTata
Usage/ApplicationInfrastructure
Size12mm
Product TypeTata Tiscon Sd Tmt Bar
Country of OriginMade in India
Yes! I am Interested
Request CallBack
  • 8 mm Tata Tiscon Sd Tmt Bar
  • 8 mm Tata Tiscon Sd Tmt Bar
  • 8 mm Tata Tiscon Sd Tmt Bar
  • 8 mm Tata Tiscon Sd Tmt Bar
  • 8 mm Tata Tiscon Sd Tmt Bar
  • 8 mm Tata Tiscon Sd Tmt Bar
  • 8 mm Tata Tiscon Sd Tmt Bar
  • 8 mm Tata Tiscon Sd Tmt Bar
  • 8 mm Tata Tiscon Sd Tmt Bar
8 mm Tata Tiscon Sd Tmt Bar
Get Best Quote

8 mm Tata Tiscon Sd Tmt Bar

Approx. Price: Rs 86 / KgGet Latest Price
Product Details:
Minimum Order Quantity200 Kg
Model NameTiscon SD
MaterialIron
GradeFe550D
YS570 MPa
% Total Elongation122 Min
TypeTMT
BrandTata
Product Details
  • Here comes the complete reform with the Super Ductile. Tata Tiscon 550SD It is the newest and most formidable force to build a future perfect construction. A testament to the unmatched trust of Tata Steel, it is India’s first .GreenPro certified rebar and is manufactured using industry leading innovative automation. Made from virgin iron ore and pure steel, every rebar has more load carrying capacity because of its supreme strength and ductility. Not to mention its enhanced earthquake resistant properties.
  • More load carrying capacity of the rebars. For a given design load, fewer number of rebars or reduced diameter is required.
  • Easily carries design load without any structural cracks
  • Optimised design leads to reduce steel consumption
  • Up to 6% savings on steel quantity
  • Our sustainable manufacturing practices have reduced the environmental impact of our rebars
  • GreenPro Ecolabel enables you to make an informed and sustainable choice
  • Tata Tiscon 550SD rebars are available in pieces of consistent dimensions
  • Each piece is of accurate length, diameter and weight

Yes! I am Interested
Watch Video
Request CallBack
  • Tata Tiscon 550sd Tmt Bar
  • Tata Tiscon 550sd Tmt Bar
  • Tata Tiscon 550sd Tmt Bar
  • Tata Tiscon 550sd Tmt Bar
Tata Tiscon 550sd Tmt Bar
Get Best Quote

Tata Tiscon 550sd Tmt Bar

Approx. Price: Rs 385 / PieceGet Latest Price
Product Details:
GradeFe 550D
BrandTATA
Country of OriginMade in India
We are the leading supplier of TATA Tiscon TMT bars we would be supplying as per the requirements in excellent quality 

Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
Vizag TMT Bar
Get Best Quote

Vizag TMT Bar

Approx. Price: Rs 72.50 / KgGet Latest Price
Product Details:
Minimum Order Quantity200 Kg
GradeFe 500D
MaterialIron
Usage/ApplicationConstruction
TypeTMT
BrandVizag
UsageConstruction
Elongation12%
Product Features :-
  • Low Carbon content and made from fully killed steel
  • Higher yield strength , ultimate tesile strength and higher percentage elongation when compared to cold twisted bars of some grade.
  • Easy bendability, weldability, and excellant ductability ensures exonomy and safety of use.
  • In built ability to resist loss of strength of higher temperature
  • Requires less energy for bending and rebending along with superior reverse bending properties
  • Can be bulit welded or lap welded
  • Use of Fe-500 Grade results in soving more than 15% in steel consumption when compared to cold wisted bars
  • Higher corrosion resistance and sesmic ressitance compared to CTD
  • Unideally suited for any type of concrete structure
  • The only plant to adopt this technology for production of rebars from the design stage. Hence the total extent of the superior technology could be harrnessed 120 meters length of the cooling bend avail, able for self tempering which no other mill in india can match is the testimony for this.
  • These bars are made from virgin steel in bloast furnace, basic oxygen furncae continuous casting route. steel is fully killed best quality raq materials. rolling is done in the stage of the art mills with latest technologes. not even a single ton of rebar in produced by conversion
  • The low carbon content and low carbpn equivalent of Vizag TMT reinforcement bars ensure excellent weldability even while using any of the welding processors such as arc welding, flahs butt welding, gas shielded semi automatic wleding, gas pressure wleding and resistance arc welding etc. welding of these bars does not require pre heating or post heating. Vizag TMT Bars indiacte good welding properties in case of butt welds cross welds and lop welds. Tensile tests carried out on these reinforcement bars after butt welds, cross welds and lap welds have shown no failure at the weld joints. Normal electrodes with matching strength can be used for welding
  • Fatigue test carried out on Visag TMT Bars (by subjecting to alternate tensile stressing) has shown that the fatigue strength o fthe bars is equal to the reinforcement bars produced by other methods. The fatigue test was also carried out on bent and angled bars encaed in concrete. The results were obtained by using constant amplitude loadng of 200 Mpa with a maximum stress squal to 0.7 X Yield strength. The fatigue strength of these bars meets the requirements given in various international standards


Additional Information:
  • Item Code: 63194
Yes! I am Interested

Explore more products

X